Water Heater Installation in New Braunfels, TX
We routinely perform water heater repairs and replacements. We are stocked and able to take care of all your water heater replacement needs, including water pressure reducing valves, vacuum relief valves, gas sediment traps, expansion tanks, water shut-off valves, flood-stops and any other plumbing item related to the safe installation of your water heater.
Our basic Installation is defined as the installation of a new water heater in place of an old one. Unit must be accessible for the plumber to uninstall and reinstall a new one.
Basic Installation of a water heater includes:
- Shutting-off your water, gas, or electric and draining your old water heater.
- Removing the old unit and putting the new water heater in its place.
- Connecting the new water heater to the existing code approved utilities.
- Gas water heaters will be hooked up to the existing flue and gas line.
- Electric water heaters are reconnected to the existing electric.
- Water pressure and thermal expansion will be checked.
- We will haul away the old water heater and any trash associated with the install.
On average, a water heater lasts 8 to 12 years. Maybe even more than that if you’ve got a really good appliance on your hands. But as it nears the end of its lifespan, no matter how good it is, it gets cranky. The morning shower isn’t as warm or the warm water doesn’t last as long. Sometimes a repair can increase the appliance’s lifespan and in other cases, the cost of repair is so high, that it’s time for a replacement. But how do you know which is which?
Water Heater Repair in New Braunfels, TX
A water heater is one of the most important appliances of your home. Unless it’s been turned off for some specific reason such as while you’re on vacation, a water heater is used every single day. So, like any other appliance at your home, problems can come up in your water heater too.
Fixing a leaking water heater can be very challenging or tricky sometimes. At the first sign of leaking, many people leap to the conclusion that the water heater must be replaced, but that’s not always necessary. Many potential fixes are actually rather simple and inexpensive, and sometimes replacing a broken part can extend the life of the water heater for several years.
A well-installed and maintained water heater can sometimes last up to 20 years, which is a great news for you. But to reach a grand old age like this, a water heater needs to have repairs done as soon as problems start to emerge. With fast action and our trained plumbers who knows how to handle any water heater problem, you can stop a malfunction from growing and threatening your entire hot water supply. You just have to call us to accomplish all this.
At LONE STAR WATER SERVICE, we have experience with water heater repair in Driftwood, Texas. When you call us for repairs, you will get top-of-the-line work from our technicians who use the best of plumbing technology.
These are 3 of the most common Water Heater repairs that we do to help reach their full lifespan:
- Flushing the tank
This is a standard step that is done as part of annual maintenance. However, it is often a necessary repair. Sediment build-up in the water tank can lead to problems with blocked valves, and will also encourage the development of scale along the inside of the tank and lead to overheating. If you notice discoloration in your water, or you hear rumbling from the tank, call our repair professionals immediately. They will see if flushing the tank will fix the problem.
- Replacing broken dip tube
The dip tube carries fresh, cold water from the municipal system down into the tank of a water heater and deposits it at the bottom, near the heating elements/heat exchanger, where it receives energy to heat it and then rise to the top of the tank. If the dip tube breaks, cold water will start to gather at the top of the tank and mix with the heated water, resulting in a drop in the water temperature from your faucets and showerheads and causing you to run out of hot water earlier than usual. To fix this, our plumbers will open up the tank and replace the broken tube.
- Replacing burnt-out heating elements
In water heater, two heating elements inside the tank directly transfer heat to the water. Like any electrical device, these elements can fail. If the temperature of your hot water turns lukewarm, it may be the fault of a broken heating element in the tank. Our experienced plumbers can replace the burnt-out element with a new one quite easily.
Average Cost to Repair a Water Heater in New Braunfels, TX
We promise you to do the Best Service at an Honest Price.
Most homeowners do not think about water heater until something goes wrong. Whether the unit has started leaking or has stopped heating, a swift repair is essential for your comfort and well-being. Before calling LONE STAR WATER SERVICE plumber, you should know everything that goes into the cost of repairing a water heater.
We keep our promise by giving you the expert range of water heater repair options from our trained and certified plumber technicians. Our pricing is upfront, and we stick to it.
You’ll never pay more than what was quoted. This gives you the comfort and peace of mind to make an informed decision before any work is started.
So, no matter how long it takes, we will do it correctly.
The standard cost to repair a broken water heater is $483. Most homeowners pay between $244 and $576 to have their faulty water heaters fixed. The final cost of having a water heater repaired will depend on the age of your water heater, the type of water heater, the scope of the problem, and whether supplementary repairs to the natural gas supply, plumbing, or electrical systems are needed. Water heater repairs can be done by our experienced, trained, and licensed professional easily. So, contact us immediately.
Electric Water Heater Repair in New Braunfels, TX
Electric water heaters look similar to their gas-fueled mates. Both of them use an insulated storage tank jacket made of steel, with insulation between the storage tank and the tank jacket to reduce heat loss of the heated water.
The main distinction between electric and gas water heaters is the heat source. In an electric water heater, the water is heated by electric upper and lower heating elements that stretch into the water tank. Gas water heaters have a gas burner which heats the water from below the tank.
Electric water heaters are high-voltage appliances that are threatening to work with when the power is on. Before checking any electrical parts of a water heater, turn off the power to the heater’s circuit.
Problems with little or no heat usually are caused by a failed heating element, an inexpensive part that is relatively easy to replace. Other issues may be due to improper settings, high home water pressure, or a lack of tank maintenance. So, for overall maintenance or repairs call us. We’ll be glad to help you.
The Problem: No Hot Water
A water heater that produces no hot water might be out of power, or it may have a tripped limit switch or one or more failed heating elements. We start by examining the water heater’s circuit breaker in the service panel to make sure it hasn’t tripped. If the breaker has tripped, we switch it off, then switch it back on again.
If the heater’s breaker did not trip, we try to reset the high-temperature limit on the radiator.
If that doesn’t solve the problem, each heating element has to be tested or replaced if necessary. Call or plumbers for replacement.
The Problem: Inadequate Hot Water
If your water heater is producing hot water, but not enough of it, your unit could be too small to meet the household’s hot water demand. Assure that the demand does not exceed the capacity of the water heater. The water heater should have at least 75 percent of its capacity as hot water. For example, a 40-gallon water heater is appropriately sized for a demand of 30 gallons. If your unit is not undersized, or it suddenly produces less hot water than it used to, one or both of its heating elements may have failed. A steady supply of lukewarm water during a shower is symbolic of a defective upper heating element. Hot water that runs out quickly during a shower is characteristic of a faulty lower heating element. You should get your water heater repaired if that happens. We would be happy to assist you in any way possible.
The Problem: Water Temperature Too Hot
Too much hot water can be almost as frustrating as not enough hot water. If you’re experiencing this problem, it’s possible that one or both of your water heater’s thermostats is set too high. If this problem arises in your water heater, then it can get your skin burned. So call our plumbers for safe usage of your appliance.
The Problem: Water Leaks
Water leaks are ordinarily caused by leaking valves and plumbing connections. But tank related problems can also cause leaks. Leaking water can cause significant damage to a home, so it is essential to fix the leak as soon as possible.
Leaks from water heater tanks can be because of loose heating elements or due to tank corrosion. A corroded tank cannot be repaired and must be replaced. So, just switch off the power and call us for replacement.
The Problem: Rust-Colored Water or Bad Odor
If your water comes out of the faucet with a brown, yellow, or red tint to it, there could be corrosion occurring inside your water heater tank or in the pipes in your home. If your water comes out smelling like rotten eggs, there could be bacteria in the water heater tank. You might need to substitute the anode rod in the tank. Call LONE STAR WATER SERVICE immediately if this happens.
The Problem: Tank Making Noises
Are there noises coming from your water heater? Does it sound like a low rumbling or popping noise? Or maybe it’s a high pitched whine? The noise you’re hearing may be the sound of boiling water. Excessive buildup of sediment in the bottom of the tank can cause the bottom of the tank to overheat, boiling the water. The first solution can be to drain the tank to get rid of the sediment. If that doesn’t help, you may need to replace the tank. We can easily do that for you.
Gas Water Heater Repair in New Braunfels, TX
Water heaters are generally very reliable, but sometimes they do have problems, such as little or no hot water, rusty or smelly water, odd noises, and even leaks. If you need to inspect your water heater or make any repair, be sure to turn off the power and the gas supply & remember calling our professional plumbers for your assistance. But before calling us follow these steps as a precaution-
- Switch off the power to an electric water heater by switching off the circuit breaker.
- Switch off the gas supply by turning the gas pilot control valve to the “pilot” setting on the water’s gas valve.
- Switch off the water supply to the water heater, if necessary, by closing the shut-off valve on the cold water pipe coming into the top of the heater tank. Do not switch off the water, until & unless the water heater’s power and gas are turned off.
The Problem: No Hot Water
There is nothing more shiver-inducing and unpleasant than a cold shower. If your water is not at a pleasant temperature, your water heater could be at the root of the problem. Fundamental things to check on a gas water heater are the pilot, the thermocouple, and the gas control valve. On the electric unit, thermostats and the heating elements could cause a problem. But, we can help you with ease, so do not worry at all.
The Problem: Inadequate Hot Water
Insufficient hot water means your shower starts hot and quickly turns cold. If your water heater is creating some hot water but not enough to meet your needs, there are several possible issues to address, which includes the temperature setting, the heating elements (electric heaters only), sediment in the tank, and a damaged or disconnected dip tube.
The Problem: Rusty or Smelly Water
It can be quite worrisome when you turn on your faucet to discover discolored water or a nasty rotten egg smell. Pipe corrosion or bacteria buildup could be the possible perpetrators in this case. Call us immediately to totally eradicate this smell from your home.
The Problem: Strange Noises
If you’re hearing mysterious noises coming from your basement, it’s probably just your water heater. A low rumbling or popping noise is the sound of boiling water. Excessive buildup of sediment in the bottom of the tank is causing the tank to overheat and, in turn, causing the water to boil. You’ll have to remove the sediment by flushing your water heater.
If hissing sounds are coming from a water heater then it could indicate a leak in the tank that’s allowing water to drop down onto the burner. If the water heater is new or has been turned off for a while, and recently turned back on, there could be condensation from the bottom of the tank dripping onto the burner. This will subside once the tank fully heats up. LONE STAR WATER SERVICE will solve this problem for you within minutes.
The Problem: Water Leak around Base of Heater
Any leak is always a nuisance. A leaking water heater could be the result of a faulty temperature and pressure (T&P) relief valve or a leak from a nearby plumbing connection or even the tank itself. A T&P valve and plumbing leaks can be repaired by our highly trained plumbers. But, a leaking water heater tank cannot. The unit must be replaced as soon as possible.
Tankless Water Heater Repair in New Braunfels, TX
A Tankless, or on-demand, water heater is an economical choice for heating water for laundry, dish-washing, or showering. These heaters do not store hot water, so you’re not using energy to heat the water to have it standing in the tank. Instead, when a flow-activated switch comes on, the heat exchanger turns on and heats the water as you need it. Tankless water heaters come in styles like a coffee pot fathomed into the water system, or as whole-house units. But, like other things in your home, they need to be maintained and, sometimes, you might need to troubleshoot and repair them. For most issues, this is an easy project that you can do yourself.
It can take up to 20 years for your Tankless heater to pay for itself with energy bill savings. So, it’s an investment worth preventative care. You shouldn’t avoid repairing your water heater. With regular upkeep, it will last much longer.
Tankless Water Heater Repairing Solutions
If you are facing any Tankless water heater problems, continue reading to know more about repairing one of your favorite appliance. But, since you are not a plumber, therefore, call us. We will help you in any way possible.
No Hot Water
- Inspect both the power source and water supply to be sure that both are connected and turned on.
- Verify to be sure that both shut-off valves are open and that water flows at the minimum flow rate to activate the switch. Call us so that we can help you better.
Water Is Too Hot or Not Hot Enough
- Set the unit temperature to 120 to 125 degrees. This is the recommended temperature for safety. If you live with small children or others with sensitive skin, you may want to reduce the heat.
- Call us for cleaning the filters and fixture aerators of your heater.
- Reposition the temperature sensor so that it is firmly attached to the appropriate pipe.
Changes in water quality
You can also place a request for your water to be tested to ensure safety or eliminate inflow as a sediment cause. Contact us immediately in case you need any help.
Call & ask our professional and highly trained plumbers to check your water source to eliminate iron. If iron levels are present in large amounts, then this can be an urgent safety concern.
Banging or rumbling noises
Call us at once to perform a service check and determine whether or not your hot water heater is taking in sediment.
Pressure & temperature inconsistencies
Keep track of changes. If they are becoming more frequent and tense over time, or if it’s affecting your quality of life. Then, it’s a good idea to have a service call so that you can measure efficiency levels of your unit.
Warning messages and/or error code on the unit
We’ll come out at any point of time to assess your Tankless unit and identify the root cause. But, make sure that you note the warning message and time for a more accurate report of your product.